Kia Soul: Inhibitor Switch. Removal
Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch. Removal
1. |
Place the shift lever into the "N" position.
|
2. |
Disconnect the battery negative (-) cable.
|
3. |
Remove the air cleaner.
(Refer to Engine Mechanical System - "Air cleaner")
|
4. |
Disconnect the inhibitor switch connector (A).
|
5. |
Remove the shift cable mounting nut (B).
|
6. |
Remove the manual control lever (B) and the washer after removing
a nut (A).
|
7. |
Remove the inhibitor switch (A) after removing the bolts (2ea).
|
Inhibitor Switch. Inspection
• Thoroughly check connectors for looseness, poor connection, bending, corrosion, cont ...Inhibitor Switch. Installation
1. Check that the shift lever is placed in the "N" position 2. Install the inhibitor switch (A). ...See also:
Battery Specifications
▷ CMF60L-BCI
Item
Specification
Capacity [20HR / 5HR] (AH)
60 / 48
Cold Cranking Amperage (A)
550 (SAE) / 440 (EN)
Reserve ...
Manual climate control system
To defog inside windshield
1. Select any fan speed except “0” position.
2. Select desired temperature.
3. Select the or
mode.
4. The outside (fresh) air and air conditioning will be selec ...
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by a signal from the control unit. Pressing the intake selection switch
will shift between recirculation and fr ...