Kia Soul: Hazard Lamp Switch Inspection
1. |
The SJB can be diagnosed by using the GDS. The SJB communicates
with the GDS which then displays inputs and outputs along with codes.
It will be able to diagnose defects of hazard lamp switch
with GDS quickly. GDS can operates actuator forcefully, input/output
value monitoring and self diagnosis.
|
2. |
To diagnose the SJB function, select the vehicle model, BCM
and SJB.
|
3. |
To consult the present input/out value of SJB, "Current DATA".
It provides information of SJB input/output conditions.
|
Overhead Console Lamp Installation
1. Install the overhead console lamp after connecting the connector. 2. Install the lens after tightening 2 screws. ...Hazard Lamp Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the center airvent assembly (A). ...See also:
Temperature control
The temperature control knob allows you to control the temperature of the air
flow from the ventilation system. To change the air temperature in the passenger
compartment, turn the knob to the r ...
2. Evaporative emission control (including ORVR: Onboard Refueling Vapor Recovery)
system
The Evaporative Emission Control System is designed to prevent fuel vapors from
escaping into the atmosphere.
(The ORVR system is designed to allow the vapors from the fuel tank to be loaded
into ...
To keep locks from freezing
To keep the locks from freezing, squirt an approved de-icer fluid or glycerine
into the key opening. If a lock is covered with ice, squirt it with an approved
de-icing fluid to remove the ice. If ...