Kia Soul: Glove Box Housing Replacement
Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Crash Pad / Glove Box Housing Replacement
|
|
1. |
Using a screwdriver or remover, remove the crash pad side cover
[RH] (A).
|
2. |
Loosen the glove box housing mounting bolts (A).
|
3. |
After loosening the mounting screws, then remove the glove box
housing (A) by using a screw driver.
|
4. |
Disconnect the glove box lamp connector (A).
|
5. |
Remove the glove box housing mounting clip (A).
|
6. |
Install in the reverse order of removal.
|
Glove Box Housing Component Location
1. Glove box housing ...Steering Column Shroud Panel Component Location
1. Steering column shroud lower panel 2. Steering column shroud upper panel ...See also:
Adjustment
Inspect Glass Alignment
1.
Inspect the alignment of the movable glass (C) that is between
the front (A) and rear (B) glass and if needed adjust it.
...
SS-A Solenoid Valve(ON/OFF). Removal
1.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
2.
Remove the drain plug (A) and dr ...
Front Impact Sensor (FIS). Installation
•
Do not turn the ignition switch ON and do not connect
the battery cable while replac ...