Kia Soul: Front Seat Belt Pretensioner Replacement - Front Seat Belt - Body (Interior and Exterior)Kia Soul: Front Seat Belt Pretensioner Replacement

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Front Seat Belt / Front Seat Belt Pretensioner Replacement

  
•
When installing the belt, make sure not to damage the pretensioner.
1.
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim")
2.
After loosening the mounting bolt, then remove the front seat belt upper anchor (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.
After disconnecting the pretensioner connector lock pin, remove the front seat belt pretensioner connector (A), loosen the mounting bolt, then remove the front seat belt pretensioner (B).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

4.
Install in the reverse order of removal.
  
•
Make sure the connector is plugged in properly.
•
Replace any damaged clips.
    Front Seat Belt Pretensioner Component Location
    1. Front seat belt pretensioner ...

    Height Adjust Component Location
    1. Height adjust ...

    See also:

    Auto Light Sensor Inspection
    In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light se ...

    Transaxle Control Module (TCM). Installation
    1. Install in the reverse order of removal.    • ...

    Rear Console Cover Component Location
    1. Rear console cover ...