•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Remove the mounting clips, and then remove the air duct (A).
|
2. |
Loosen the radiator upper cover mounting bolts and clips.
|
3. |
Loosen the front bumper lower mounting clips.
|
4. |
After loosening the front bumper side's mounting screw, then disconnect
the side's.
• |
Remove the front bumper by pulling up the side
of the front bumper and then pull it out.
|
|
• |
When you pull out the front bumper, the side part
of the front bumper could be damaged by the projection.
|
|
|
5. |
Disconnect the fog lamp connector (A) and front bumper main connector
(B).
[LH]
[RH]
|
6. |
Remove the front bumper cover.
(1) |
Lift up the lower side of the front bumper cover (A).
|
(2) |
Remove the front bumper cover (A) by pushing it rearward
to release the locking pins (B) located upper side of the front
bumper cover.
|
(3) |
Remove the front bumper cover (A).
|
|
7. |
Install in the reverse order of removal.
• |
Make sure the connector is plugged in properly.
|
• |
Replace any damaged clips.
|
|
|
1. Front bumper cover
...