•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Take care not to scratch the body surface.
|
|
1. |
Using a screwdriver or remover, remove the fender garnish (A).
|
2. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
•
Put on gloves to protect your hands.
...
•
Put on gloves to protect your hands.
...
See also:
Low tire pressure telltale
When the tire pressure monitoring system warning indicators are illuminated,
one or more of your tires is significantly under-inflated.
If the telltale illuminates, immediately reduce your speed, ...
Cooling Fan Inspection
Fan Motor
1.
Disconnect the fan motor connector from the resistor.
2.
Connect the battery voltage to the "+" terminal and ...
Front Wheel Speed Sensor. Components
1. Front wheel speed sensor
2. Front wheel speed sensor connector
...