Kia Soul: Dynamic Damper Installation
Kia Soul 2014-2019 PS Service Manual / Driveshaft and axle / Driveshaft Assembly / Dynamic Damper Installation
1. |
Apply soap powder on the shaft to prevent being damaged between
the shaft spline and the dynamic damper.
|
2. |
Install the dynamic damper.
|
3. |
Install the dynamic damper band (A).
|
4. |
Using the SST(09495-3K000), secure the TJ boot bands (B).
|
5. |
Install the TJ joint assembly.
(Refer to Driveshaft Assembly - “TJ Joint”)
|
6. |
Install the front driveshaft.
(Refer to Driveshaft Assembly - “Front Driveshaft”)
|
7. |
Check the front alignment.
(Refer to Suspension System - "Front Alignment")
|
Dynamic Damper Replacement
1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refe ...BJ Boot Components
1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly ...See also:
Air Conditioning refrigerant label
Each symbols and specification on air conditioning refrigerant label means as
below ;
1. Classification of refrigerant
2. Amount of refrigerant
3. Classification of Compressor lubricant
Refe ...
Front Impact Sensor (FIS). Components
...
Time Format
This function is used to set the 12/24 hour time format of the audio system.
Select [Time Format] Set 12Hr / 24Hr through
TUNE knob
Clock Display when Power is OFF
Select [Clock Disp.(Pwr Off) ...