| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the cowl side trim.
(Refer to Interior Trim - "Cowl Side Trim")
|
|
2. |
Using a screwdriver or remover, remove the crash pad side cover
[LH] (A).
|
|
3. |
After loosening the mounting screws, then remove the crash pad
lower panel (A) by using a screw driver.
|
|
4. |
Disconnect the diagnosis connector (A).
|
|
5. |
Install in the reverse order of removal.
|
• |
Make sure the connector are connected in properly.
|
|
• |
Replace any damaged clips.
|
|
|
1. Crash pad lower panel
...
See also:
Manual transaxle fluid (if equipped)
Inspect the manual transaxle fluid according to the maintenance schedule.
✽ NOTICE
Automatic transaxle fluid color is basically red. As the vehicle is driven,
the automatic transaxle fluid ...
Transmitter precautions
✽ NOTICE
The transmitter will not work if any of following occur:
The ignition key is in the ignition switch.
You exceed the operating distance limit (about 30 feet [10 m]).
The batter ...
Change to "winter weight" oil if necessary
In some climates it is recommended that a lower viscosity "winter weight" oil
be used during cold weather. See section 8 for recommendations. If you aren't sure
what weight oil you s ...
Kia Soul: Crash Pad Lower Panel Replacement
Crash Pad Lower Panel Component Location
Glove Box Housing Component Location