| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the front door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
|
|
2. |
Remove the hood latch release handle.
(Refer to Hood - "Hood Latch Release Handle")
|
|
3. |
Slighty remove the front door body side weatherstrip.
|
|
4. |
Using a screwdriver or remover, remove the cowl side trim (A).
|
|
5. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
See also:
Condenser Replacement
1.
Recover the refrigerant with a recovery/recycling/charging station.
2.
Disconnect the negative (-) battery terminal.
3.
...
Component Location
1. Windshield deicer relay (Built-in ICM relay box)
2. Windshield deicer switch (FATC type)
3. Windshield deicer switch (Manual type)
4. Windshield deiecr
5. ...
Master Cylinder. Installation
Master Cylinder assembly
1.
Install in the reverse order of removal.
2.
After installing, bleed the brake system.
(Refer to Brake s ...
Kia Soul: Cowl Side Trim Replacement
Cowl Side Trim Component Location
Front Pillar Trim Component Location