Kia Soul: Control Shaft Complete Removal - Manual Transaxle Control System - Manual Transaxle SystemKia Soul: Control Shaft Complete Removal

Kia Soul 2014-2019 PS Service Manual / Manual Transaxle System / Manual Transaxle Control System / Control Shaft Complete Removal

1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Set shift lever to "N" position.
4.
Remove the control cable from the control shaft after remove the pin (A) and washer (B).

5.
Remove the control shaft assembly after loosen the bolts.

Tightening torque:
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m,14.5 ~ 19.5 lb-ft)

    Control Shaft Complete Description
    Component location : Control shaft assembly is mounted on the top of the manual transaxle Function : Change the gear by shifting a shift lever. ...

    Control Shaft Complete Installation
    1. Install in the reverse order of removal.    • ...

    See also:

    Fuel tank air filter Inspection
    1. Visually check the fuel tank air filter(A) for cracks, leaks, loose connections, or deformation. ...

    Smart key function
    1.Door lock 2.Door unlock 3.Tailgate unlock 4.Panic (if equipped) ...

    Winter driving
    Severe weather conditions in the winter result in greater wear and other problems. To minimize the problems of winter driving, you should follow these suggestions: ...