Kia Soul: Component Replacement after Deployment
Kia Soul 2014-2019 PS Service Manual / Restraint / Component Replacement after Deployment
Before doing any SRS repairs, use the GDS to check for DTCs. Refer
to the Diagnostic Trouble Code list for repairing of the related DTCs.
|
When the front airbag(s) deployed after a collision, replace the following
items.
| - |
SRSCM
|
| - |
Deployed airbag(s)
|
| - |
Seat belt pretensioner(s)
|
| - |
Emergency fastening device
|
| - |
Front impact sensors
|
| - |
SRS wiring harnesses
|
| - |
Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.
|
When the side/curtain airbag(s) deployed after a collision, replace the
following items.
| - |
SRSCM
|
| - |
Deployed airbag(s)
|
| - |
Side impact sensor(s) for the deployed side(s)
|
| - |
SRS wiring harnesses
|
After the vehicle is completely repaired, confirm the SRS airbag system
is OK.
| - |
Turn the ignition switch ON, the SRS indicator should come on
for about 6 seconds and then go off.
|
Special Service Tools
Tool Name / Number
Illustration
Description
Deployment tool
0957A-34100A
Used for deploying airbag
Deployment adapter
0957A- ...
Precautions
General Precautions
Please read the following precautions carefully before performing the
airbag system service.
Observe the instructions described in this manual, or the airbag ...
See also:
Cool box (if equipped)
You can keep beverage cans or other items cool in the glove box.
1. Turn on the air conditioning.
2. Slide the open/close lever of the vent installed in the glove box to the open
position.
3. ...
Oil Pump Removal and Installation
1.
Remove the timing chain cover.
(Refer to Timing System - "Timing Chain Cover")
2.
Remove the pump cover (A).
...
Battery Sensor Description
Vehicles have many control units that use more electricity. These units
control their own system based on information from diverse sensors. It is important
to have a stable power supply as th ...