Kia Soul: Chassis/Body nuts & bolts Inspection - Chassis - MaintenanceKia Soul: Chassis/Body nuts & bolts Inspection

Kia Soul 2014-2019 PS Service Manual / Maintenance / Chassis / Chassis/Body nuts & bolts Inspection

1.
Tighten bolts and nuts on chassis and body.
(1)
Where necessary, tighten all the parts of the chassis.
A.
Front axle and suspension
A.
Drive train
A.
Rear axle and suspension
A.
Brake system
A.
Engine mounting
A.
Fuel tank
A.
Exhaust pipe system, etc.
(2)
Where necessary, tighten all the parts of the body.
A.
Seat belt system
A.
Seat
A.
Doors and hood
A.
Body mountings, etc.
    Brake pedal Inspection
    Check that the brake pedal operates smoothly. Brake Pedal Height and Stop Lamp Switch clearance Adjustment 1. Disconnect the stop lamp switch connector (A). ...

    Disc brakes and pads Inspection
    Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. Front Brake Front Brake Disc Thickness Check 1. Check the ...

    See also:

    Exterior feature
    Roof rack If the vehicle has a roof rack, you can load cargo on top of your vehicle. The following specification is the maximum weight that can be loaded onto the roof rack. Distribute the load ...

    TPMS Receiver Operation
    1. General Function A. Auto-learn takes place only once per Ignition cycle. B. On successful compl ...

    Ignition Coil Installation
    1. Install in the reverse order of removal. Ignition coil installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft) ...