•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Using a screwdriver or remover, remove the center fascia panel
(A).
|
2. |
Disconnect the A/C & heater controller connectors (A).
|
3. |
Install in the reverse order of removal.
• |
Make sure the connector are connected in properly.
|
• |
Replace any damaged clips.
|
|
|
1. Center fascia panel
...
1. Crash pad lower panel
...
See also:
Ignition switch position
LOCK
The steering wheel locks to protect against theft. The ignition key can be removed
only in the LOCK position. When turning the ignition switch to the LOCK position,
push the key inward at ...
Manual transaxle operation
The manual transaxle has 6 forward gears. This shift pattern is imprinted
on the shift knob. The transaxle is fully synchronized in all forward gears
so shifting to either a higher or a lower ...
External Amplifier Removal
1.
Disconnect the negative (-) battery terminal.
2.
Loosen loosening the mounting nuts.
3.
Remove the a ...