Kia Soul: Brake Switch. Adjustment
Brake switch clearance adjustment |
If the gap between brake switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in),
conform to below.
1. |
Disconnect the brake switch connector (A).
|
2. |
Pull the locking plate (A) as indicated by the arrow.
|
3. |
Turn brake switch 45° counterclockwise and remove it.
|
4. |
Fix the brake pedal arm and insert fully the brake switch as hiding
contact part.
|
5. |
After inserting, turn the brake switch 45° clockwise, and then
assemble locking plate by pushing.
|
6. |
Confirm the gap between brake switch and bracket.
|
7. |
Connect the brake switch connector (A).
|
Brake Switch. Installation
1. Fix the brake pedal arm and insert fully the brake switch as hiding contact part. 2. After inserting, turn the brake switch 45° ...Front Disc Brake. Components
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...See also:
Filler-Neck Assembly. Repair procedures
Removal
1.
Open the fuel filler door and unfasten the filler-neck assembly mounting bolts (A).
...
Crash Pad Center Panel Component Location
1. Crash pad center lower panel
...
Using iPod® device
iPod® is a registered trademark of Apple Inc.
iPhone® is a registered grademark of Apple inc.
Some iPod® models may not support communication protocol and files may not properly ...