Kia Soul: Automatic heating and air conditioning
1. Push the AUTO button. It is indicated by AUTO on the display. The modes, fan speeds, air intake and air-conditioning will be controlled automatically by temperature setting.
2. Push the temperature control button to set the desired temperature. (Type A)
Turn the temperature control knob to set the desired temperature. (Type B)
✽ NOTICE
- To turn the automatic operation off, select any button or switch of the
following: - Mode selection button
- Air conditioning button
- Front windshield defroster button
- Air intake control button
- Fan speed control switch The selected function will be controlled manually while other functions operate automatically. - Regardless of the temperature setting, when using automatic operation, the air conditioning system can automatically turn on to decrease the humidity inside the vehicle, even if the temperature is set to warm.
Never place anything over the sensor located on the instrument panel to ensure better control of the heating and cooling system.
Automatic climate control system
1. Temperature control button / knob
2. Front windshield defroster button
3. Rear windshield defroster button
4. Climate control display
5. Air intake control button
6. Air conditioning butto ...
Manual heating and air conditioning
The heating and cooling system can be controlled manually by pushing buttons
other than the AUTO button.
In this case, the system works sequentially according to the order of buttons
selected.
W ...
See also:
Warnings and indicators
All warning lights are checked by turning the ignition switch ON (do not start
the engine). Any light that does not illuminate should be checked by an authorized
Kia dealer.
After starting the en ...
Piston and Connecting Rod Reassembly
•
Thoroughly clean all parts to assembled.
•
...
General
The supplemental restraint system (SRS) is designed to supplement the
seat belt to help reduce the risk or severity of injury to the driver and passenger
by activating and deploying the drive ...