Kia Soul: Auto Head Lamp Leveling Unit Inspection
Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Auto Head Lamp Leveling Device / Auto Head Lamp Leveling Unit Inspection
1. |
Ignition "ON".
|
2. |
Turn on the head lamp switch.
|
3. |
Check for operation. If the aim of the head lamps changes
smoothly when the head lamp leveling switch is turned.
|
4. |
If the operation does not work well, inspect the connector
and terminals to be sure they are all making good contact.
If the terminals are bent, loose or corroded, repair them
as necessary, and recheck the system.
If the terminals look OK, go to step 5.
|
5. |
Substitute with a known-good head lamp assembly and check
for proper operation.
|
Auto Head Lamp Leveling Unit Operation
Operating Procedure 1. Suspension angle change resulted from vehicle's load change. 2. Sensor angle change. ...Auto Head Lamp Leveling Unit Removal
1. Remove the head lamp leveling unit connector (A). 2. Remove the head lamp leveling unit (B) after loosening the mountin ...See also:
Lubricants
Engine
Joint
Lubricants
Quantity
Nu 2.0
BJ
GRB006
105g (+10g/0)
TJ
SH06-VX21
140g (+10g/0)
Gamma ...
ESC OFF usage
When driving
It’s a good idea to keep the ESC turned on for daily driving whenever possible.
To turn ESC off while driving, press the ESC OFF button while driving on
a flat road surface.
...
Engine overheat
If your temperature gauge indicates overheating, you experience a loss of power,
or hear loud pinging or knocking, the engine will probably be too hot. If this happens,
you should:
1.Pull off the ...