Kia Soul: Alternator Disassembly - Charging System - Engine Electrical SystemKia Soul: Alternator Disassembly

Kia Soul 2014-2019 PS Service Manual / Engine Electrical System / Charging System / Alternator Disassembly

1.
Remove the rear cover (A) after removing nuts.
2.
Remove the mounting bolts (A) and the brush holder assembly (B).
3.
Remove the slip ring guide (A) after pulling it.
4.
Remove the OAD(Overrunning Alternator Decoupler) cap.
  
•
When installing, replace with new OAD cap.
5.
Remove the OAD(Overrunning Alternator Decoupler) pulley (A) using the special tool.
6.
Unsolder the 3 stator leads (A).
7.
Remove the 4 through bolts (A).
8.
Disconnect the rotor (A) and bracket (B).
    Alternator Installation
    1. Install in the reverse order of removal. 2. Adjust the alternator belt tension after installation. (Refer to Engine Mechanical ...

    Alternator Reassembly
    1. Reassemble in the reverse order of disassembly.    • ...

    See also:

    Cylinder Head Cover Installation
    1. Install the cylinder head cover (A) with a new gasket (B).    Do ...

    Components
    1. Clutch pedal assembly 2. Ignition lock and clutch switch 3. Master cylinder 4. Clutch tube 5. Clutch release cylinder ...

    Registering your vehicle in a foreign country
    If you plan to register your vehicle in a foreign country, you should confirm that it conforms to the regulations in that country. Even if you successfully register the vehicle in a foreign countr ...